|
Especially designed for facilities that experience frequent impact damage to rack columns and outrigger rollers from impact and anchor bolts.
Prevents impact seperation of the rack column from the footplate. Designed with angular side protection to deflect forces away from the rack column.
To repair this low level damage simply weld or bolt the guard to column (see pic) the guard to the rack column. This transfers the load to the guard. A safe low cost alternative to replacing rack columns.
Can be fabricated for most rack types.
|
| Installed to rack columns the Bully Foot Guard will minimize rack damage from outriggers and forks.
For repair of damage below the floor level beam a weld is used to transfer the load to the Bully Foot Guard.
Very economical and effective.
|
 |
| Impact damage at floor level. |
|
|
 |
| Bully Foot Guard repairs & protects against low level impact. |
|
|
Repairs and protects rack columns damaged near the foot plate by lift truck outriggers and forks.
|
|
Eliminates damage by lift trucks operating in confined spaces.
The Bully Foot Guard is fabricated to fit snug against the rack column. This eliminates the need to re-anchor bumped guards that are constantly being impacted.
Bully Foot Guard absords impact and transfers stress to the floor. This eliminates damage to the rack column.
Bully Foot Guard is affordable and easy to install. For protection the guard is installed with 2 anchor bolts. For repair and protection 2 anchor bolts and 2 column bolts ( or welding ) is required.
Safety yellow paint is standard. Color match paint is available for a small extra charge.
|
|
